Grade | Fe | Cr | Ni | Mn | Si | C | P | S |
SS 309S | 60% | 23% | 14% | 2% | 1% | 0.20% | 0.045% | 0.030% |
salem stainless steel 309 (UNS S30900) is an austenitic hardened steel created for use in high temperature erosion obstruction applications. The composite opposes oxidation up to 1900°F (1038°C) under non-cyclic conditions. Visit warm cycling diminishes oxidation protection from around 1850°F (1010°C). Due to its high chromium and low nickel content, Alloy 309 can be used in sulfur containing climates up to 1832°F (1000°C). The composite isn't suggested for use in profoundly carburizing climates since it shows just moderate protection from carbon assimilation. Amalgam 309 can be used in marginally oxidizing, nitriding, solidifying and warm cycling applications, but, the greatest assistance temperature must be diminished.
Specification | ASTM A240 / ASME SA240 |
Manufacturing Process | Hot Rolled (HR) / Cold Rolled (CR) |
Grades | 202 / 304 / 304L / 304H / 309S / 310S / 316 / 316L / 316Ti / 317L / 321 / 321H / 347 / 347H / 904L etc. UNS No. - UNS S30400, UNS S30403, UNS S31008, UNS S31620, UNS S31603, UNS S31603, UNS S31635, UNS S31703, UNS S32100, UNS S34700, UNS S34709, UNS S8904 EN No. - 1.4301, 1.4307, 1.4845, 1.4401, 1.4404, 1.4571, 1.4438, 1.4541, 1.4550, 1.4551, 1.4539 |
Thickness | 0.6 MM TO 80 MM THICKNESS |
Width | 1250 MM / 1500 MM / 2000 MM / 04 Feet / 05 Feet and Custom Cut Width as Per Requirement |
Length | 2400 MM / 2420 MM / 6000 MM / 08 Feet / 10 Feet / Coil Cut and Custom Cut Length as Per Requirement |
Surface Finish | 2B, 2D, BA, MATT, MATT PVC, No.4, No.5, SB, HR, No.8, Mirror, Hairline, Brush, Textured, Oil base wet Polished, Both sides Polished available. |
Grade | Fe | Cr | Ni | Mn | Si | C | P | S |
SS 309S | 60% | 23% | 14% | 2% | 1% | 0.20% | 0.045% | 0.030% |
Yield Strength 0.2% Offset0 |
Ultimate Tensile Strength |
Elongation in 2 in. |
Hardness | ||
psi (min.) | (MPa) | psi (min.) | (MPa) | % (min.) | (max.) |
45,000 | 310 | 85,000 | 586 | 50 | 202 (HBN) |
Grade | Density (lb / cu. in.) | Specific Gravity | Specific Heat (Btu/lb/Deg F – [32-212 Deg F]) | Electrical Resistivity (microhm-cm (at 68 Deg F)) | Melting Point (Deg F) | Modulus of Elasticity Tension |
309S | 0.287 | 7.9 | 0.12 | 468 | 2650 | 29 |
STANDARD | UNS | JIS | WERKSTOFF NR. | AFNOR | BS | GOST | EN |
SS 309S | S30908 | SUS 309S | 1.4833 | – | – | – | – |